Elevator Traction Machine Oil
Oil formulated for elevator traction machines. The technical table distinguishes mineral and synthetic variants, including two separate 8046A columns.
Choose your specification.
Select a grade or type, pack size and quantity. We will use these details to prepare your quotation.
Packaging image not available for this option. The product can still be included in your inquiry.
RunChee · Elevator Traction Machine Oil · 8032A / 8046A / 8032C / 8046C · 200 L
Select grade & packaging.
Series: Specialty Lubricant Series
8032A · 200 L
Your selection is carried into the inquiry form. Tell us the delivery destination and any document requirements when you inquire.
Select the base oil type together with the model. Mineral and synthetic 8046A have separate columns.
Available grades & packaging
| Type / model | Packaging options | Choose |
|---|---|---|
| Mineral oil type · 8032A | 200 L · individual container | |
| Mineral oil type · 8046A | 200 L · individual container | |
| Mineral oil type · 8032C | 200 L · individual container | |
| Synthetic oil type · 8046A | 200 L · individual container | |
| Synthetic oil type · 8046C | 200 L · individual container |
Where to use this product.
Applications
Suitable elevator and escalator traction machines; the supplied application description covers elevator speeds below 4 m/s. Select both base oil type and full model code.
- 01
Lubricating-film strength helps protect moving contacts from scuffing.
- 02
Viscosity-temperature behavior supports operation as conditions change.
- 03
Oxidation and copper-corrosion control address gearbox service.
Compare the grades before ordering.
Check the test conditions and limits alongside the grade you are ordering.
| Property / test condition | Mineral oil type · 8032A | Mineral oil type · 8046A | Mineral oil type · 8032C | Synthetic oil type · 8046A | Synthetic oil type · 8046C | Test method |
|---|---|---|---|---|---|---|
| Kinematic viscosity (40°C),mm²/s | 288~352 | 414~506 | 288~352 | 414~506 | 288~352 | GB/T265 |
| Viscosity index (min.) | ≥ 90 | 90 | 120 | 120 | 120 | GB/T1995 |
| Flash point(Open cup), °C (min.) | ≥ 200 | 220 | 200 | 220 | 200 | GB/T3536 |
| Solidification point, °C (max.) | ≤ - 12 | -12 | -25 | -25 | -25 | GB/T510 |
| Water, % (max.) | ≤ Trace | Trace | Trace | Trace | Trace | GB/T260 |
| Mechanical impurities, % (max.) | ≤ 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | GB/T511 |
| Copper corrosion test(T₂,3h,100°C)Class (max.) | ≤ 1 | 1 | 1 | 1 | 1 | GB/T5096 |
| Demulsibility (82°C,40-37-3ml),min (max.) | ≤ 40 | 40 | 40 | 40 | 40 | GB/T7305 |
| Rust prevention test (Synthetic seawater) * | No rust | No rust | No rust | No rust | No rust | GB/T11143 |
| Foaming characteristics (Tendency / Stability) ml/ml · GB/T12579 | ||||||
| Initial 24°C≤ | To confirm | To confirm | To confirm | To confirm | To confirm | GB/T12579 |
| 93.5°C≤ | To confirm | To confirm | To confirm | To confirm | To confirm | GB/T12579 |
| After 24°C≤ | 75/10 | 75/10 | 75/10 | 75/10 | 75/10 | GB/T12579 |
| Load-wear index (1500r/min),N≥ | 392 | 392 | 392 | 392 | 392 | GB/T3142 |
Swipe or scroll inside the table to compare columns. Limits are reproduced from the supplied product specification. “Report” indicates a result to be reported; “—” indicates no value stated. Request the current TDS for the exact grade.
Some foam limits need confirmation. They are marked “To confirm” in the table.
Product documents for your selected grade.
The performance comparison above is available online. Request a current TDS or SDS for this model and grade; document availability and revision are confirmed with your request.
Before you request a quotation.
Which grade or type should I select?
The listed grades or types are Mineral oil type · 8032A, Mineral oil type · 8046A, Mineral oil type · 8032C, Synthetic oil type · 8046A, Synthetic oil type · 8046C. Match the selection to your equipment manual or formulation requirement. If you are unsure, send us the equipment model and the specification you are working to.
What packaging can I request?
Listed packaging: 200 L · individual container. Confirm availability, order quantity and shipping details in the written quotation.
Does the picture cover every specification?
Packaging photos are references for the grade and pack shown in the caption. A listed specification can still be requested when there is no matching photo.
Can I request the TDS, SDS or approval information?
Ask for the current TDS for the exact grade and the relevant SDS. Tell us the destination country and any approval requirement so document availability can be confirmed before the order.
What information do you need for a quotation?
Include Elevator Traction Machine Oil, the grade or type, pack size, quantity and delivery destination. Add your equipment requirement or document request where relevant. We will confirm the product and supply details in a written quotation.
Request Elevator Traction Machine Oil.
Send the grade or type, pack size, quantity and delivery destination. We will confirm the product and supply details in a written quotation.